Step-by-Step Vehicle Specific Installation Guide:
No sitting with a lap-full of spaghetti-wire, no info to download or videos to watch and no jumping back-and-forth from vehicle wiring chart to system manual to figure out what wires are needed and not needed to connect to your vehicle. Each VSS system includes a concise step-by-step vehicle specific installation manual that clearly indicates what wire from the system connects to what wire in the vehicle, where the wire is located (the majority of our manuals also include photo's) and how to easily confirm that you found the correct wire using the VSS kits supplied LED style test probe.
LED Style Test Probe:
No need for using awkward multi-meters that indicate voltage level's that can confuse polarity readings and require the use of two probes and a bare spot on the wire in order to take a reading. Each of our VSS kits includes an easy to use LED style test probe to use along with the VSS kits step-by-step vehicle specific installation manual. This test probe simplifies the procedure of testing for the correct wire in your vehicle by lighting a green or red LED to indicate the target wire's polarity (explained in each step of the vehicle specific install manual)
Installation Connector Kit:
Each VSS system includes 3 different sizes of quick-connect "T-Tap" connectors with pre-crimped insulated male spade connectors on the ends of the system's wiring for making quick connections from the system to the vehicle's wiring. Also included are crimp cap connectors for connecting wires end-to-end and self-tapping screws with ground loop connectors for making chassis ground connections. Also supplied are nylon zip ties for securing wiring, control module and sensor under the dash.
Includes Vehicle Specific Extras:
We know the inconvenience of getting into the middle of an installation and finding out that you need to stop and run to the auto parts store for a relay or an electronics store for some resistor's or whatever, so we include any needed extra relays, diodes, resistors, voltage inverters, etc. needed for your specific vehicle's installation and pre-wire them into the system for you.
Vehicle Compatibility Guarantee:
You will be asked to indicate the year, make and model of vehicle the system will be installed into during ordering. If in the rare event that one of our technicians finds that the system is not compatible to your specific vehicle, we will immediately void the order and promptly release your payment.