DIY Vehicle Specific Ready Kits for the Car-Savvy Do-It-Yourselfer'
When wanting to get into your vehicle pre-warmed on a cold winter morning or have the interior cooled off after a hot day of it sitting in the sun, the APSRS-2LEDZ vehicle specific ready remote starter system with it's step-by-step system-to-vehicle installation manual will guide you to getting the job done faster & easier!
Installing the APSRS-2LEDZ into your vehicle will provide you with the luxury of pre-warming up your engine and interior plus defrost the windshield all by remote control. Not having to go out on those icy cold mornings to start up your vehicle is probably the most convenient feature a vehicle can have. Live in a warmer climate? Just pre-set your AC to pre-cool the interior after a hot day of it sitting in the sun. Say goodbye to hot seats and burning steering wheels!
You may not see the need to go beyond your garage or driveway to remote start your car, but increased range with 2-way confirmation is definitely an advantage when your parked at work, out shopping or in a restaurant, especially when the weather is bad. With standard remotes, you're looking out the window to see if your parking lights are on (or you can see the exhaust when it's cold) to confirm that you successfully activated the remote starter. With a 2-way remote, the advantage is when your vehicle is out of sight you can be sitting at your table in a restaurant or in the checkout line at the grocery store and have visual and sound confirmation right on your remote that your vehicle has remote started, or not! Even double check that you locked the vehicle's doors and more!
Easily identify, locate and confirm the wiring in your vehicle using our vehicle specific step-by-step installation guide and LED style test probe with installation connector kit.
All our our remote starter and alarm kits arrive at your door complete with all the parts and information you'll need to install the system into your specific vehicle. Guaranteed!
APSRS-2LEDZ 2-Way Confirming Remote Starter Features
IncludesOne 2-Way LED Remote Transceiver:2-way confirming abilities will enable you to confirm successful remote starting of your vehicle, doors locked, unlocked, power trunk activation all within 1 MILE of your vehicle. The remote will flash the corresponding buttons LED and emit a slight beep in a pattern depending on the vehicle's status (Remote on the left in photo).
Includes a 2nd 1-Way Standard Remote:Controls all the standard features of the system from the same distance as the 2-way remote just without the 2-way confirmation. Chromed metal reinforced to withstand the daily wear & tear of hanging from your keychain (remote on the right in photo).
Remote Keyless Entry: Remotely locks (and arms, see below) & unlocks (disarm) all your vehicles doors.
NEW! All Entrance Alarm Protection Option* (No Extra Charge): If your vehicle didn't come equipped with a factory alarm system you can easy add one with just 1 extra wire** connection if you want. Alarm all your vehicle's doors with the system's OEM style security alarm option (offered during checkout). The system will utilize your vehicle's horn as a sounding device if any of the vehicle's doors are opened after being locked with one of the system's remotes. And as an EXTRA BONUS: if your vehicle is equipped with accessible OEM hood and/or trunk trigger wires the kit will supply 2 extra independent inputs for each additional trigger.
*Option cannot be turned on after installation, the system must be ordered with the alarm option pre-programmed ON or the control module would have to be sent back in for computer programming (additional service labor charges may apply)
**On most vehicle's; some vehicle's can require up to 4 additional connections when protecting all doors. If required extra inputs will be supplied.
Safety 2-Press Remote Start Activation:The remote starter is activated by pressing the remote start button on the remote 2X within 3 seconds. This setting helps prevent any accidental activation that could occur with a single press activation setting.
Parking Lights Confirmation:Visual confirmation that you activated the remote starter: The system will flash the vehicles parking lights 1X right after you activate the remote starter and then turn the parking lights on solid shortly afterwards to indicate that the vehicle is running via the remote starter.
Pre-Heat/Pre-Cool Activation: Pre-setting your vehicle's heat settings prior to exiting your vehicle will enable you to pre-warm the interior and defrost the windshield when your vehicle is running via the remote starter. Same with the vehicle's AC, just pre-set the AC settings where you like it and it will pre-cool the interior on those hot days from it sitting in the sun.
Multiple Remote Start Run Times:The system will be set-up for you with whatever run time you wish that's available: Your choices will be 5, 10, 15, 20, 45 or 60 minutes. You can order the system pre-set with any one of these times. 15 minutes is the industry standard. You can easily change the run time yourself anytime after installation.
Quick-Stop Mode:A cool feature that allows you to keep the engine running without having to leave the keys in the ignition: While the engine is still running with the keys, you press the remote start button on the remote 2X and when you turn off the ignition and remove the keys the engine will remain running for the duration of the remote start run time.
Safety Brake Pedal Shut-Down Input: Mandatory connection that will immediately shut down the remote starter system if you step on the vehicle's brake pedal before you put the key's into the ignition and turn the ignition on (a.k.a. "key-take-over" feature).
Valet/Remote Start ON/OFF Mode: The system includes a valet mode where the remote starter feature can be temporarily turned off inhibiting the remotes from being able to activate the system.
Windshield Mounted Antenna w/Built-In Programming/Valet Button & Status LED: Commonly mounted at the top inside center of the vehicle's windshield directly behind the rear-view mirror for optimal operating range. The antenna conveniently incorporates both the system's programming/valet button and status LED. This eliminates any hole drilling in the vehicle's dash and reduces the amount of wire's needed to be run under the dash during installation.
Ignition Controlled Door Locks: Many newer vehicles on the road today have auto-locks which locks the vehicle's doors shortly after you begin to drive, if your vehicle is not equipped with this feature you can order the system to provide a similiar version: Auto-lock with ignition ON only, Auto-lock & unlock with ignition ON/OFF or just unlock doors with ignition OFF.
Illuminated Entry:The system has the ability to automatically turn your vehicle's interior/dome lights on at the same time you unlock the doors with one of the systems remotes for 30 seconds. Feature offered during checkout.
Power Trunk/Hatch/Back-Glass Activation: For vehicle's equipped with a power trunk or hatch release, just press & hold the remote's trunk icon button for over 3 seconds and it will separately pop open your vehicles trunk (or hatch).
Multiple Remotes Capability: The system can be programmed to work with one or two additional remotes for a total of up to 4 remotes at the same time (additional remotes sold separately. Discounted remotes w/system purchase offered during checkout).
Diesel Compatible/Adjustable Delay Timer:Programmable crank delay settings for Diesel engines. The system will be pre-set for you with any of the pre-set times available. Your choice of "wait-to-start" times are: 10, 15 or 20 seconds before crank to allow for proper glow-plug warming. You will be able to easily change this setting if need be after installation. Industry standard time is 15 seconds.
Turbo Timer Mode: If your vehicle is equipped, this feature will keep the engine running to allow your vehicle’s turbo to properly cool down before shutting the engine off. The system has 3 turbo timer run times: 3, 5 and 10 minutes. Choice provided during checkout.
2 Auxiliary Outputs Capability: For more advanced installer's looking for a system that has auxiliary outputs for future expandable options like window roll-up/down, sunroof control etc. this system has 2 negative auxiliary outputs and each can be adjusted to 1 of 5 different timed outputs: pulse, push & hold, 10 sec. latched, 20 sec. latched and latched ON/OFF. Call us for complete details.
Smartphone Control Ready: Plug&Play ready for Audiovox's ASCL6 smartphone control module (sold separately). Can be added/ordered anytime. Have unlimited range by controlling your system's features via your smartphone.
Remote Upgrade Capability: The system can be programmed to work with up to 4 remotes in any combination; No matter if want to upgade to a 2-Way remote with a LCD screen or add a 1-button remote just for remote starting, any choice of style remote can be added to the system now or later. Click HERE for remote choices.
▼VSS Vehicle Specific System Advantages ▼
Step-by-Step, Vehicle Specific Installation Guide: No sitting with a lap-full of "spaghetti-wire", no info to download or videos to watch and no jumping back-and-forth from a vehicle wiring chart to the system manual to figure out what wires are needed (and not needed) to connect to in your vehicle.
Each VSS system includes a concise step-by-step, vehicle specific installation manual that clearly indicates what wire from the system connects to what wire in the vehicle, where the wire is located (the majority of our manuals also include color photo's) and how to easily confirm that you found the correct wire using the VSS kits supplied LED style test probe.
LED Style Test Probe: No need for using awkward multi-meters that indicate voltage level's that can confuse polarity readings and require the use of two probes and a bare spot on the wire in order to take a reading. Each of our VSS kits includes an easy to use LED style test probe to use along with the VSS kits step-by-step vehicle specific installation manual. This test probe simplifies the procedure of testing for the correct wire in your vehicle by lighting a green or red LED to indicate the target wire's polarity (explained in each step of the vehicle specific install manual).
Includes Vehicle Specific Extras: We know the inconvenience of getting into the middle of an installation and finding out that you need to stop and run to the auto parts store for a relay or radio shack for some resistor's or whatever, so we include any needed extra relays, diodes, resistors, voltage inverters, etc. needed for your specific vehicle's installation. Installation Connector Kit: Each VSS system includes 3 different sizes of quick-connect "T-Tap" connectors with pre-crimped insulated male spade connectors on the ends of the system's wiring for making quick connections from the system to the vehicle's wiring. Also included are crimp cap connectors for connecting wires end-to-end and self-tapping screws with ground loop connectors for making chassis ground connections. Also supplied are nylon zip ties for securing wiring, control module and sensor under the dash.
Lifetime Technical Support:
Have access to some of the top technicians in the industry 7 days a week! Real technicians that actually have years of hands-on experience installing and troubleshooting the systems we offer and the vehicles they are installed into.
Vehicle Compatibility Guarantee: You will be asked to indicate the year, make and model of vehicle the system will be installed into during ordering. If in the rare event that one of our technicians finds that the system is not compatible to your specific vehicle, we will immediately void the order and promptly release your payment.
3 Year "VIP" Warranty. Best Warranty in the Industry!
In the rare event that you have a problem with your system within 3 years from date-of-delivery, just contact our technical support department and after they determine the problem, they will email you a return shipping label for the defective part and ship you the repaired or replacement part within 2 business days of receiving the defective part at no cost to you! Remotes carry a 1 year warranty only. And if you happen to be out of warranty, you still have lifetime tech support and will receive a VIP 10% discount on any out of warranty replacement parts you want. Warranty coverage extends only to full systems installed successfully and that failed under normal every day wear & tear due to factory defect or QC issues.
"If you're looking for a grade A DIY remote for your vehicle, you'd be wasting your time to look elsewhere, don't need to look any further. Awesome service and technical support. Kit arrived in 2 days, instructions were very detailed and precise telephone technical support walk through any missed instructions. I will be happy to recommend MotorCityRemotes to everyone in the future." Don Fisher 7-20-17
"Received and installed, Works great!" Murray J. (Installed a 901-VSS into a 2002 F-150) 10-27-17
"Tech was awesome! Install was on a 06 ford fusion. Had a little confusion on the flash module because of mid Year changes in the pats system. But Derrick had figured out quickly. Service was great. Doing another one on a dodge avenger. Derrick is a GREAT tech to work with. I highly recommend this product to anyone. And easy to install. Thanks again Derrick". Grumpy (04-25-18)
Full Service Sales & Support Online, by Phone, Email, Live Chat & TxT 7 Days a Week!
Call Toll-Free: 1-866-244-8004 or "TxT-a-Tek" Product Questions 24/7 to: 1-586-244-8003
Sales & Support Phone Hours: Mon-Fri: 9am-8pm, Sat: 9am-6pm & Sun: 9am-4pm ET
CLOSED: Holidays & Holiday Weekends
DMCA Copyright Act Protection: All original content is created by the website owner or published under permission including but not limited to text, design, code, images, photographs and videos are considered to be the Intellectual Property of the website owner, whether copyrighted or not, and are protected by DMCA.com Protection Service using the Digital Millennium Copyright Act Title 17 Chapter 512 (c)(3). Reproduction or re-publication of this content is prohibited without permission.