BOTH REMOTES HAVE BEEN DISCONTINUED

CLICK HERE FOR ONLY ALTERNATIVE

Code Alarm 5BLCTX 2-Way 5-Button Replacement Remote

FCC ID: ELVNTRCA
REMOTE PART NUMBER: 5BLCTX

Includes EZ QwikSync™ DIY Remote Programming Guide - 1 Year Warranty - Tech Support available via Email or Phone 7 Days a Week

Automatic 10% OFF each remote when you order 2 or more

  TECH TIPS    

Remote Identification Numbers/Letters are on the outside back of your existing remotes' case (flip it over, and you may need a magnifying glass!).

To ensure replacement remote compatibility: your existing remote must have at least one matching FCC ID or PART NUMBER (may have both) in the new replacement remotes' description below for the new replacement remote to work.

Manufacturer New Remote Design Changes: MotorCityRemotes.com is a Factory Authorized Dealer for all the brands of automotive aftermarket electronics that we offer and reserve the right to substitute or warranty any product with an equal to or greater than a component in the event that the manufacturer has discontinued, redesigned, or updated the original component, without prior notice. In any case, MotorCityRemotes.com guarantees that with any type of replacement that is provided, the substitute remote will work and program exactly like your original remote and the only difference will be the style, look, and/or brand name of the remote.

Remote Identification: Code Alarm 5BLCTX 2-Way 5-Button Replacement Remote 

FCC ID: ELVNTRCA

Original Manufacturer Replacement Remote: YES
Manufacturer: VOXX Electronics Corporation

Includes Do-It-Yourself Remote Programming Guide: YES

Compatible Replacement Remote Transmitter for System Models: CA-160, CA-145, CA-160, CA-180, CA-425, CA-645, CA-670,
CA-671, CA-680, 118C1123, APS55TW, APS590TWC, APS596, APS596A, APS596N, APS597, APS905, APS996, APS996A, APS996C, APS997, APS997A, APS997N, APS998, PRO9276TW, PRO9800, PRO9801A, PRO9801C, PRO9801i, PRO9801N and PRO9900

Remote Programming Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order.

To program transmitters:

• Turn the ignition ON.
• Press and hold the valet/override button.
• Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button.
• Press Button 1 of each transmitter you wish to program. The system will respond with 1 chirp for each accepted transmitter (up to 4).
• Turn the Ignition OFF to exit programming. The system will also exit programming after 15 seconds of inactivity. Note: This system has 1 button programming which programs all channels of the system.