SITUATION: "Have a new used vehicle with a Pursuit 095BPR remote start, keyless entry, and alarm system, and the system sounds the siren every time I use the remote to lock and unlock the doors. Is there an easy way to turn this off so it will silently lock and unlock the doors?"
ANSWER: Yes, on most systems that have the Prestige 095BP or the Pursuit 095BPR remotes, try turning the ignition ON (do not start the vehicle), and within 10 seconds, press and release the button that's built into the system's antenna that's commonly found mounted on the windshield in the top center on the glass directly behind the rear-view mirror, 3 times: The system will sound 2 short pulses for CHIRPS OFF. Now, just press and release the lock then the unlock button on the remote and it should stop and just silently lock and unlock the doors. If you wanted to turn them back ON, just repeat the same procedure, and the system will this time sound just 1 short pulse for CHIRPS ON. On a technical note, if for whatever reason you have to disconnect the vehicle's battery, you may have to go back and repeat this procedure after you reconnect the vehicle's battery.