TOPIC: "How to Reset my Flashlogic FLRS Series Remote Starter System?"
ANSWER:
STEP 1: Unplug all the connectors away from the Flashlogic module in any order BUT, you MUST unplug the BLACK 20-PIN plug LAST!
STEP 2: Now, PRESS AND HOLD in the module’s small black push-button that's on the Flashlogic module while plugging back in the BLACK 20-PIN connector:
STEP 3: Wait and few seconds while still holding the button in and the LED on the Flashlogic module should start FLASHING RED: Soon as you see the LED flashing RED, release the button:
STEP 4: After the release of the button, the LED should turn on solid RED for a few seconds then turn OFF: Module reset is now complete: Next, you must reprogram the module to the vehicle following the vehicle-specific programming procedure which differs from vehicle to vehicle. Only the reset procedure is the same no matter what year, make, and model the vehicle is.
